Leviton AESS5 User Manual Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 13
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
7
OPERATION
Surround Modes:
When using the system in a Dolby* Digital or DTS
®
home theater system,
ensure that all Cat. No. AESS5 speakers are set to “Small”.
When using the Cat. No. AESS5 in a Dolby Pro Logic* home theater
system, ensure that the receiver's center channel mode is set to
“Normal”.
Some Dolby Digital-equipped receivers/processors offer different setup
options for each source or surround mode, e.g., Cd-Stereo, Videotape,
Dolby, Pro Logic. In
each case, follow your equipment's instructions to
ensure that the subwoofer output is turned ON and the speakers are set
to “Small” in each mode.
MAINTENANCE AND SERVICE
The satellite enclosure may be cleaned using a soft cloth to remove
fingerprints or to wipe off dust.
All wiring connections should be inspected and cleaned or remade
periodically. The frequency of maintenance depends on the metals
involved in the connections, atmospheric conditions, and other factors,
but once per year is the minimum.
If a problem occurs, make sure that all connections are properly made
and clean. If a problem exists in one loudspeaker, reverse the connection
wires to the left and right system. If the problem remains in the same
speaker, then the fault is with the loudspeaker. If the problem appears in
the opposite speaker, the cause is in another component or cable.
Refer to the Troubleshooting section for additional information.
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12 13

Comments to this Manuals

No comments